Communication protocols

Communication protocol is the agreements set of the logic level interface which establish the format of data change between different devices. These agreements specify an universal method of messages transmission and errors handling when software interacts with a network of devices connected by one or another interface.

The Ric-Gate service is responsible for the devices connection. This service is used as a bridge between protocols, its main assignment consists in assurance of two-way communication between the platform and the devices networks.

After connection of the protocol driver to the platform the Ric-Gate service allows to standardize (to normalize) the data that is coming from external systems and devices to the platform. The other services of the platform and the external systems may consume both raw and normalized data in such way.

At the current moment, the following protocols are realized in the platform.

The transport telematics:

Protocol Status Address Port State Comments
Arnavi Realized 20512 Working
WialonIPS 1.1 Realized 20332 Working
WialonIPS 2.0 Realized 20332 Working
WialonCombine Realized 20333 Working
WialonRetranslator Realized 20163 Working
Galileosky Realized 20268 Working
Teltonika Realized 21451 Working
MTA8000e Realized 7000 Working
MTA6CAN Realized 7000 Working
SIGNAL 6.0 Realized 4000 Working
Navis Realized 7002 Upon request
FlickBikeOmni Realized 20510 Working


Protocol Status Address Port State Comments
MQTT Realized 1883 Working MQTT Version 3.1.1
Secure MQTT Realized 8883 Working MQTT Version 3.1.1
PowerbankBox Realized 8088 Working
Pocketpower Realized 8036 Working
Modbus Testing 20502 Testing
KNX Testing 3671 Upon request
EGTS* Retranslation Not allocated Not allocated Upon request

EGTS* provides the possibility of data retranslation by EGTS protocol to the external services, in accordance with the Order of the Ministry of Transport of the Russian Federation dated July 31, 2012 No. 285.

If the necessity in using protocols not realized in the platform have appeared, we will have to require the protocol documentation for its adding. This process in the middle takes place from one to two weeks. It is necessary to send the request on adding of the protocol to our email address